PROPEX 2000E GAS ELECTRIC BLOWN AIR HEATER V1 ONE OUTLET KIT

PX20112GE
Product Code: PX20112GE
Condition: New
£675.00
Kit Options
  • Description
  • Related Products
  • Reviews

Product Description

The HS2000E heater is an automatic thermostatically controlled blown air heating system fuelled by gas & or mains 230V electric. The heater is selectable between Gas (LPG, Butane or Propane) or mains 230V with three power levels available being 500W, 1kw or 2kW

Heatsource is designed for a variety of automotive and marine applications as a source of heat totally independent of the engine. 

Select the relevant kit to suit your application. Each kit should contain enough parts to carry out an installation up to the connection to a 8mm or 5/16th gas pipe.

Kits are divided into two types, Vehicle (V) or Marine (M)

A single outlet vehicle kit (V1) contains

  • 1 x 1 metre 60mm ducting
  • 1 x 1 metre combustion inlet pipe
  • 1 x 0.75 meter Stainless Steel Exhaust pipe
  • 1 x Thermostat
  • 3.5 metres thermostat wiring harness
  • 3.5 metres 12v supply harness
  • 1 directional hot air outlet
  • 1 directional cool air return vent
  • hose clips, fasteners, screws, inline fuse,  instructions, drilling template

A twin outlet vehicle fitting kit (V2) contains:

  • As a V1 kit with the addition of
  • 1 x open/close vent
  • 1 x Y branch
  • Extra metre of 60mm hot air ducting
  • Extra hose clips, fasteners and screws

A three outlet vehicle fitting kit (V3) contains:

  • As V1 + V2
  • And additional Y branch
  • An additional open/close vent
  • An extra metre of 60mm ducting – so 3 metres in total
  • Extra hose clips, fasteners and screws as required.

A single outlet Marine fitting kit (M1) contains:

  • 3 metres APK 60mm marine grade hot air ducting
  • 2 x 1.5 metres stainless steel exhaust and combustion inlet pipe
  • Through hull skin fitting
  • Bulkhead mounting bracket
  • Thermostat
  • 3.5 metres thermostat wiring harness
  • 3.5 metres 12v supply harness
  • 1 directional hot air outlet
  • 1 directional cool air return vent
  • Hose clips, fasteners, screws, inline fuse,  instructions,  skin fitting drilling template

A twin outlet Marine fitting kit (M2) contains:

  • As an M1 kit with the addition of
  • 1 x open/close vent
  • 1 x Y branch
  • Extra metre of 60mm APK hot air ducting
  • Extra hose clips, fasteners and screws

A three outlet Marine fitting kit (M3) contains:

  • As M1 + M2
  • An additional Y branch
  • An additional open/close vent
  • An extra metre of 60mm APK ducting – so 5 metres in total
  • Extra hose clips, fasteners and screws as required.

All installations should be carried out by a competent person and in accordance with BS EN 1949:2002


Customer Reviews
Write an online review and share your thoughts with other shoppers!


All pictures, diagrams, images and dimensions are non contractual E& O E