Fixing kit supplied with 2 brackets, 4 x 4 inch hookbolts and locking nuts.
Front bracket will need 2 holes drilled into the rear face of front cross member and bolted using a 4 inch hookbolt either side.
Rear bracket will also need 2 holes drilled into rear face of rear cross member and bolted using a 4 inch hookbolt either side.
Three welded fittings included: 2 x 19/20mm waste inlets, and 1 x 25mm drain, all pre-welded centrally on one of the long sides. Tank is handable so fittings can face either driver or passenger side, however there is more room when fittings face the driver side due to the offset of the tank towards the passenger side.
Recommend the use of smooth bore supaflex grey hose which is ultra flexible and will not clog up with waste like convoluted hose.
This tank can also be used for fresh. See separate listing.
KIT CONTAINS:-
- 1x CAK-046W Waste Water Tank 113 Litre with pre welded fittings (2 x 19/20mm waste inlets, and 1 x 25mm drain)
- 1x Set of custom made steel brackets. (Recommend painting with metal paint prior to installation)
- 1x Set of hook bolts for brackets with locking nuts
- 1x 1 metre Remote Drain Tap Kit (Grey)
OPTIONALS:-
- 1x Waste Water Level Gauge with Read out Panel (MTTR/G)
- Defrost element (DFE-02)
