This fresh tank is designed to fit with the long side running front to back of the vehicle, in the space where the spare wheel goes.  Spare wheel needs to be removed and spare wheel winch unbolted.  The tank sits very slightly offset to passenger side, behind the axle, in the spare wheel position (spare wheel position is not central), in the recess between the cross members. Capacity of 73 litres. 

Fixing kit supplied with 2 brackets, 4 x 4 inch hookbolts and locking nuts.

Front bracket will need 2 holes drilled into the rear face of front cross member and bolted using a 4 inch hookbolt either side.  

Rear bracket will also need 2 holes drilled into front face of rear cross member and bolted using a 4 inch hookbolt either side.

Three welded fittings included:  1 x 40mm inlet, 1 x 15mm pump outlet and 1 x 25mm drain, all pre-welded centrally on one of the long sides.  Tank is handable so fittings can face either driver or passenger side.    

Recommend the use of smooth bore supaflex hose which is ultra flexible.

This tank can also be used for waste.  See separate listing.

KIT CONTAINS:-

- 1x CAK-025FB Fresh Water Tank 73 Litre with pre welded fittings (1 x 40mm inlet, 1 x 15mm pump outlet, 1 x 25mm drain)

- 1x Set of custom made steel brackets. (Recommend painting with metal paint prior to installation)

- 1x Set of hook bolts for brackets with locking nuts

- 1x 1 metre Remote Drain Tap Kit (Blue)

OPTIONALS:-

- 1x Fresh Water Level Gauge with Read out Panel (MTT/G)

- Defrost element (DFE-02)