This product is intended EXCLUSIVELY for use with Lithium - LiFePo4 service batteries and must be installed by qualified technical personnel.

CSB3-LT CHARGE MODULE B1 CBE

Device for managing the recharging of the engine battery, both from the solar panel and from the battery charger, via connection to the LIFEPO4 LITHIUM service battery and to the vehicle system.

Car battery charging device
Both from the photovoltaic module and from the battery charger, via the service battery.
This device is suitable for operation with a lithium service battery and is installed near the batteries, thus avoiding having to carry the car battery cable to the regulator.
Recharges the car battery with a regulated current from 0.1A to 4A max, depending on the state of the batteries, giving priority to the service battery.

The green LED indicates that the car battery is being charged.

DIM. 80 x 50mm - H 50mm

The connections with this new parallelizer are:

Negative (mass)
Services battery positive (or control panel positive if you use an Imanager or BDS180 CBE battery management system)
Starter battery positive
Positive (signal) solar regulator
Positive (signal) charger

The last two connections are related to a 12V positive "signal" that is present when the solar regulator or battery charger is in operation.

Some solar controllers and battery chargers already have this pin present.
If there is not one, it will be necessary to create them with appropriate relays, taking as possible reference the suggestion you find among the product files to download on our site.

TECHNICAL FEATURES

     Rated voltage: 13.6 Volt DC
     Regulated current to the starter battery: 0.1 - 4 A Max
     Dimensions: 80x50x50 mm