PROPEX 2kw GAS ELECTRIC UNDERFLOOR AIR HEATER V1 SINGLE OUTLET 12V
- Related Products
The HS2212 Underfloor Mounted gas or electric Blown Air heater is designed for underfloor mounting in a motorhome, caravan or specialist vehicle. It is an automatic thermostatically controlled blown air heating system fuelled by gas or mains 230V electric and is designed for a variety of automotive applications as a source of heat totally independent of the engine.
The heater will provide 2kW heat when on gas or, when on mains 230V, has three selectable power levels of 500W 1kW and 2kW
We supply these heaters with full installation kits and are provided with one, two or three hot air outlets and associated ducting to suit your installation
Select the relevant kit to suit your application. Each kit should contain enough parts to carry out an installation up to the connection to the vehicles 8mm or 5/16th gas pipe.
A single outlet vehicle kit (V1) contains
- 2 metre 60mm APK ducting
- 1 x 1 metre combustion inlet pipe
- 1 x 0.75 metre Stainless Steel Exhaust pipe
- 1 x Thermostat
- 3.5 metres thermostat wiring harness
- 1 hot air outlet
- 1 cool air return vent
- fasteners, screws, inline fuse, instructions, drilling template
A twin outlet vehicle fitting kit (V2) contains:
- As a V1 kit with the addition of
- 1 x open/close vent
- 1 x Y branch
- Extra metre of 60mm hot air ducting
- Extra fasteners and screws
A three outlet vehicle fitting kit (V3) contains:
- As V1 + V2
- And additional Y branch
- An additional open/close vent
- An extra metre of 60mm ducting – so 4 metres in total
- Extra hose clips, fasteners and screws as required.
All installations should be carried out by a competent person and in accordance with BS EN 1949:2002
Write an online review and share your thoughts with other shoppers!