PROPEX Heatsource 2000 BLOWN AIR HEATER V1 KIT GAS 12V Camper, T5, Motorhome Caravan

PROPEX HEATSOURCE 2000 BLOWN AIR HEATER V1 KIT GAS 12V for Camper, T5, Motorhome Caravan

NEW Version with New Wall controls.
Propex blown air heaters are first choice air heating installed in campervans and motorhomes such as VW Transporter T2 T4 T5 & T6 campers and many other motorhomes and caravans.

Product Description

The HS2000 blown air space heater is an automatic thermostatically controlled blown air heating system fuelled by propane or butane gas. Heatsource is designed for a variety of automotive and marine applications as a source of heat totally independent of the engine.

Select the relevant kit to suit your application.  Each kit should contain enough parts to carry out an installation up to the connection to a 8mm or 5/16th gas pipe. Gas pressure should be at 30mbar if any other pressure is used this may void any warranty on this unit. 

Kits are divided into two types, Vehicle (V) or Marine (M)

A single outlet vehicle kit (V1) contains

• 1 x 1 metre 60mm ducting
• 1 x 1 metre combustion inlet pipe
• 1 x 0.75 meter Stainless Steel Exhaust pipe
• 1 x Thermostat
• 3.5 metres thermostat wiring harness
• 3.5 metres 12v supply harness
• 1 directional hot air outlet
• 1 directional cool air return vent
• hose clips, fasteners, screws, inline fuse, instructions, drilling template

A twin outlet vehicle fitting kit (V2) contains:

• As a V1 kit with the addition of
• 1 x open/close vent
• 1 x Y branch
• Extra metre of 60mm hot air ducting
• Extra hose clips, fasteners and screws

A three outlet vehicle fitting kit (V3) contains:

• As V1 + V2
• An additional Y branch
• An additional open/close vent
• An extra metre of 60mm ducting so 3 metres in total
• Extra hose clips, fasteners and screws as required.

A single outlet Marine fitting kit contains:

• 3 metres APK 60mm marine grade hot air ducting
• 2 x 1.5 metres stainless steel exhaust and combustion inlet pipe
• 1.5 metre exhaust heat sleeve
• Through hull skin fitting
• Bulkhead mounting bracket
• Thermostat
• 3.5 metres thermostat wiring harness
• 3.5 metres 12v supply harness
• 1 directional hot air outlet
• 1 directional cool air return vent
• Hose clips, fasteners, screws, inline fuse, instructions, skin fitting drilling template

A twin outlet Marine fitting kit (M2) contains:

• As an M1 kit with the addition of
• 1 x open/close vent
• 1 x Y branch
• Extra metre of 60mm APK hot air ducting
• Extra hose clips, fasteners and screws

A three outlet Marine fitting kit (M3) contains:

• As M1 + M2
• An additional Y branch
• An additional open/close vent
• An extra metre of 60mm APK ducting so 5 metres in total
• Extra hose clips, fasteners and screws as required.

All installations should be carried out by a competent person and in accordance with BS EN 1949:2002