56 Litre Fresh Water Tank Kit for Renault Trafic 2014 Onwards SWB LWB Campervan BLACK filler
Fits standard and long wheel base – Fresh Water Tank Black Filler
Tank fits in the spare wheel zone. Spare wheel and spare wheel carrier need to be removed.
This fresh tank is designed to fit in the rearmost half of the spare wheel cavity right at the back of the vehicle. The tank is fitted slightly offset to the passenger side. Capacity is approx. 56 litres.
The tank will have a 10mm gap above the tank to the vehicle floor due to clipping points for the rear tread step. Therefore it will need 10mm of packing on top of the tank. (Do not block breather holes). The tank will then sit 10mm lower than the rear towing eye.
Fixing kit supplied with 2 steel brackets, 2 x 6 inch hookbolts and 2 x 10mm bolts all with locking nuts.
Front fixing of the brackets use the two 6 inch hookbolts. The driver side fixing uses an existing 20mm hole in the base of the cross member opposite the spare wheel mount. The passenger side fixing needs a 9/10mm hole drilled into the base of the cross member to line up with the rear spare wheel mounting bracket on the passenger side.
Rear fixings require 2 x 10mm bolts fully threaded, which fix into the existing holes in the spare wheel carrier mounts. Locking nuts also required (supplied).
Pre-welded fittings included: 1 x 40mm inlet, 1 x 15mm outlet to pump and 1 x 25mm drain fitting. All connections are on the driver side face of the tank.
Kit includes:
- Pair of steel fixing brackets
- 2 x 6" hookbolts with nuts and locking nuts
- 2 x 10mm bolts with nuts and locking nuts
- 40mm blue supaflex inlet hose with 2 hose clips
- 25mm blue supaflex drain hose with 2 hose clips and a spring clip
- Blue drain tap
- Black filler with locking cap and 2 keys
This tank can be paired with the CAK-221W tank used as a waste to sit side by side in the spare wheel zone.
Also fits:
- Vauxhall Opal Vivaro – 2014-2018
- Nissan NV300-2014-2018
- Nissan Primastart 2022 onwards
- Fiat Talento 2016-2020
Also available as a pressure fill and a nut in fitting kit for fresh or waste.
See separate listings.